$325 shipped or more through app. No splitting the GL/heat shield from the gun. Bought it to turn it into a gun from a game, but I’m going with one of my other M16s. This is a G&P M16A3 along with their M203/Heat Shield. It has a coat of flat black over the whole body (minus the markings on the left side) while I tinkered with stencils for the paint job I had planned for this project. The only thing I know is missing is the mock bolt catch. Lonex A2 motor, G&G Steel 18:1 gears, G&G 1 metal-tooth piston, SHS (I believe) bore-up piston head/cylinder head/cylinder, King Arms (I think) tappet plate, VFC trigger setup with MOSFET, 8mm bearings mixed with a few VFC steel bushings, and KA (I believe) metal hop chamber. Other mentions: G&G gearbox shell (radiused), VFC trigger, and an APS dust cover (the OG tab would bump against the cylinder. This one at least shuts, although it's not a super tight fit as there's no "ledge" for a dust cover to latch onto). Shooting around 365 FPS. Comes with one hi-cap and the gun/M203. Let me know if you also want the OG dust cover for any reason.