Made to order, custom designed and made 40mm Airsoft Grenade Speed Loader. With this speed loader, you can load your grenade in 30 seconds or under, compared to minutes of loading each hole one by one. Takes 3-5 days for processing/fabrication. Only works with standard 12 holed grenades. Tested with and modeled off of the “Matrix Mosquito NRS2 "No Reset" CNC Aluminum 40mm Airsoft Gas Launcher Grenade (Capacity: 120 Rounds)”, but should work with most 12 hole grenades, regardless of how long they are. There is a picture of the one I use in the photo gallery. Included in your package will be: -Main Speed Loader Cylinder -6 Shafted Pusher -1 Shafted Pusher -Stabilization Sleeve -Spill Hole Cover Instructions for use: 1. Place your grenade on a flat surface (table, floor, etc) 2. Place the main cylinder component on top if the grenade (side with the SEETS TACTICAL branding on it) 3. Place the 6 shafted pusher into the top of the main cylinder, and turn the main cylinder until the pusher goes fully down and “locks” into the holes of the grenade. This is how you know it is lined up. 4. Put on the spill hole cover 5. Pour bb’s until all 6 holes of the speed loader are full 6. Remove the spill hole cover and let the remaining bb’s spill out of the spill hole 7. Take the 6 shaft pusher and push the bb’s down into the grenade 8. Rotate the grenade slightly so the other 6 empty holes of the grenade are lined up. You can use the pusher to line it up like before. 9. Repeat steps 4 through 7 and your grenade is full. 10. Use the single pusher if needed if some of the holes in the grenade aren’t fully filled on the first try. 11. Have fun blasting people with your grenade launcher and reload in a snap! **Disclaimer** This product is 3D printed. It is printed in a way to be strong, but like any plastic product, this can break if dropped from high height, thrown, or loosely stored in a bag/container with other things like air soft guns and other equipment. You don’t have to baby it, but don’t go throwing it around either. I would recommend you store this separately from anything that can potentially crush/crack it.